Tire Carrier Hinge Kit - HEAVY DUTY - 1-3/4" Spindle

Tire Carrier Hinge Kit - HEAVY DUTY - 1-3/4" Spindle



This is the answer for all of you who are looking to carry larger than 33" tires or who are having issues with your current setup. The spindle is 1-3/4" in diameter and comes with a 4" long bearing housing. The bearing housing is huge with a 2-3/4" outside diameter.

If you want to build your own tire carrier this hinge is a must. There are many options out there, but none compare to this. It is machined in our shop from heavy wall D.O.M.

Features a 1-3/4" base diameter spindle, dual tapered roller bearings, oil seal, dust cap, castle nut with cotter pin. Also includes a Zerk fitting for grease to ensure a long trouble free life. This will make your job much easier and first rate quality.

To avoid breaking spindle shafts and misalignment at setup, we provided a strong DOM tubing sleeve that is recessed and welded into the bumper. We recommend welding the sleeve into the bumper as opposed to the spindle shaft. Fully welding in the spindle shaft can crystallize and weaken the material causing it to prematurely fail.

We recommend welding the sleeve into the bumper while the spindle shaft is inside the sleeve at the correct height. Doing so will cause the sleeve to pressure fit onto the spindle shaft as the ID of the sleeve will shrink. We then recommend putting a few small tack welds onto the bottom of the shaft to the inside of the DOM tubing sleeve. This will be more than enough to hold the spindle shaft in place.

*Note that this is a universal kit that can be used to fabricate a swing away system with any application or vehicle etc.



  • (1) 1-3/4” Spindle Shaft
  • (1) Bearing Housing – 2-3/4” OD x 4” Long
  • (1) Sleeve (optional) – 2-1/8” OD x 1-3/4” ID x various lengths
  • (2) Races ***PRESSED IN / FULLY INSTALLED***
  • (2) Bearings
  • (1) Flat Washer
  • (1) Castle Nut
  • (1) Cotter Pin
  • (1) Dust Cap




Kit ships via USPS Priority Mail. Contact us for bundled shipping prices when ordering multiple items.

USA = $10.95

USA Overnight = $44.95


SKU DIY00121
Quantity in stock 19 item(s) available
Weight 12.00 lbs
Sleeve Length
Bearing Housing Length
Market price: $109.95
Our price: $84.95
Quantity (19 available)
: *
: *
: *
Type the characters you see in the picture:

2003 - 2006 Jeep Wrangler Rubicon Locker Upgrade Override Kit Bearing Housing - For use with 1-3/4" Spindle & 84 type shafts SALE - Bearing Housing - For use with 1-3/4" Spindle & 84 type shafts Shock Tab or Axle Tube Tab - Flat bottom Universal weld on fabricator bung - blind hole
Solo Seat Weld On Spring Mount Perches Competition 4x4 - Heavy Duty Rear Bumper Competition 4x4 - Shorty Front Bumper - Standard Duty Competition 4x4 - Shorty Front Bumper - Heavy Duty

Product rating

Customer Reviews

  • Author: Benito Rincon
    This is a great product, I used it when we built the tire carrier on my Silverado 2500HD back in September of 2012 and so far its held up great. If I had to do it all over again, I would buy another one