If you want to build your own tire carrier then this hinge is a must. There are many options out there, but none compare to this. It is machined in our shop from heavy wall DOM. Features a 1000 pound rated spindle, dual tapered roller bearings, oil seal, dust cap, castle nut with cotter pin.
Features a massive 1,750 pound rated spindle. This is the answer for all of you who are looking to carry larger than 35" tires or who are having issues with your current setup.
A brand new unique style by Competition 4x4. The Double Shear style supports the top and bottom of the spindle to eliminate spindle fatigue that leads to breaking and shearing.
These are our heavy duty weld-thru clevis/shackle mounts. If you are building your own bumper or beefing one, up these are the mounts to use. Available in 3 sizes to fit 2" wide to 4" wide bumpers.
Finish off your bumper with one of our weld in receivers. They are designed to be welded inside the bumper. The hitch pin access is behind the bumper. The front is recessed to enhance looks without sacrificing departure angle. Available in multiple lengths for various bumpers.
Designed to fit a standard 2" receiver with 5/8" hitch pin. This is a standard style receiver with the receiver pin mounting on the front of the bumper (not hidden and behind the bumper like the recessed version).
This is a replacement bearing housing for our 1000 lb. Tire Carrier Hinge Kit (part #DIY0001) or as an ala carte item. For use with 1-1/4" round spindles.
This is a replacement bearing housing for our 1,750 lb. Tire Carrier Hinge Kit (part #DIY0012) or as an ala carte item. For use with 1-3/4" round Spindles.
This is a replacement bearing kit - for use with our 1000 lb. housing Tire Carrier Hinge Kit (part #DIY0001) or as an ala carte item. Fits 1-1/4" round spindles.
This is a replacement bearing kit - for use with our 1,750 lb. housing Tire Carrier Hinge Kit (part #DIY0012) or as an ala carte item. Fits 1-3/4" round spindles.
1-3/4" Diameter spindle for use with tire carriers and trailer axles. Stub area is 4" long. For use with our 1,750 lb. tire carrier hinge kit or ala carte.
Milled and slotted for easy mounting and assembly.
Manufactured from 3/16" thick steel for heavy duty applications. Available for Jeep Wranglers 1976 -2006 (CJ/YJ/TJ/LJ)
Constructed from 1/4" thick heavy duty receiver material. Item is 7-3/4" long x 2 5/8" square x 1/4" thick wall. Item is sloted to allow 1/2" bolt to telescope a tire mount.
For bolt patterns: 5 on 4.5" (YJ and TJ Jeep Wrangler), 5 on 5.5" (CJ Jeep Wrangler), and 8 on 6.5" for popular 8 lug large wheels. Constructed from 1/4" thick plate and drilled.
