REAR BUMPER FRAME TIE IN MOUNTING BRACKETS.

Laser cut with precision bending.
Manufactured from 1/4" thick steel for heavy duty applications.

Available for Jeep Wranglers 1976-2006 (CJ/YJ/TJ/LJ)

This product is a must for anyone carrying over a 31" tire and/or using a tire carrier. Since the stock rear cross members of Jeeps are thin and not made to carry added weight, this is the best possible solution and upgrade you can do. The gas tank etc. does not need to be dropped. Some YJ/TJ Jeeps that are using aftermarket shackles etc. may have to make modifications to fit. This is a quick and easy install that anyone can do with a few wrenches. Kit includes the brackets and all needed mounting hardware. Brackets come stock in black color. Brackets use stock bolt hole locations, but offer additional mounting holes if you desire to drill into the frame for additional mounting points. Please specify year of Jeep at time of purchase so we can get you the correct brackets.

Part # FTB0001

Price per pair: $45.00 + S&H

TRACTION ACTION

DON'T GET STUCK WITHOUT THIS!!!

TRACTION DEVICE FOR MUD SNOW AND ICE.

You won't be stranded out in the muck or the ice with this handy gadget. A simple tool that will save time money and maybe even your life. Includes 2 traction mats inside a nylon bag with Velcro closure. Small enough to fit under seat!

Part # TA0001

Price: $29.95 + S&H

2003-2006 JEEP WRANGLER
RUBICON LOCKER UPGRADE

Tired of only being to operate your factory lockers in 4low? With this upgrade you will be able to operate them in 2wd, 4hi and the factory 4low!
By following these detailed instructions and installing a supplied electrical connector you can have all those options with your factory installed lockers.
You will also receive very detailed instruction with your purchase that is crucial for proper installation. Included will be a complete installation sheet with pictures of the entire process and an electrical connector to complete the project. This is a easy install even for the challenged! You will only need pliers and a screwdriver for proper install.

Part # RLU0001

Price: $10.00 +S&H

Jeep Wrangler Tow Hook

EXPLORER PRO COMP

TJ/LJ 1997 - 2006 Wrangler

front tow hook (single)

Comes complete with tow

hook, clip, two nuts, and bolts. No drilling required.; Tow Hook; 2 Hole; Black/ Chome; Complete Kit

Part # EXPTH6BC = Black

Part # EXPTH6CC = Chrome

Price each: $17.95 +S&H

UNIVERSAL FRONT TOW HOOK

Fits: CJ/YJ Jeep Wrangler

Comes complete with tow hook (single), clip, two nuts, and bolts. No drilling required.; Tow Hook; 3 Hole; Black/Chrome; Complete Kit

Part # EXPTH7BC = Black

Part # EXPTH7CC = Chrome

Price each: $24.95 +S&H

Rear tow hook for receiver

Be equipped with the right extreme trail gear on your next run. If you need a recovery strap, tow hook or a place to store your gear, look to Smittybilt. All of our Extreme Trail Gear has been tested and rated to outperform the competition, hands down. Black Color.

Fits: Standard 2" reciever

Part # S/B7610

Price: $14.95 +S&H

Rear Universal Tow Hook

Recovery Straps

2” x 30’ Explorer Pro Comp 20K lbs. rated.

Part # EXP230000

Price: $49.99 +S&H

2” x 30’ Genuine Truck accessories brand

Part # CC230

$39.99 +S&H

2” x 20’ Explorer Pro Comp 20K lbs. rated
Part # EXP220000

Price: $35.99 +S&H

3” x 20’ Genuine Truck accessories brand.
Part # CC330

Price: $49.95 + S&H

Currie - Antirock Sway Bar

The Currie Antirock Sway Bar provides balanced performance of front and rear suspension for rugged off-road conditions.It gives the driver increased traction by balancing and distributing the weight over all four tires.The Antirock Off-Road sway bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition.This kit includes all components, bushing, hardware and step by step instructions.It is positioned through the front cross member and attaches to the stock mounts on the axle housing on the Jeep TJ's.

Fits Jeep Wrangler TJ 1997-2004

Part # CE-9900

Price : $294.99 +S&H

Currie – Adjustable Front and rear Trac Bars.

Front – Johnny Joint trac arm is designed to center the front of the axle assembly under the vehicle after installation of a lift kit and or the springs settle.

Fits 1997-2004 Jeep TJ

Part # CE9120

Price : $199.95 + S&H

Rear – Uses the same features of the trail and race proven Johnny Joint front front trac bar. This is a must for the completing unit to the front to optimize your TJ’s articulation without rolling.

Part # CE9120R

Price : $195.99 + S&H

Also available with bracket for lifted vehicles.

Part # CE9123

Price : $249.95 + S&H

Explorer Pro Comp MX-6R Reservoir Shock

Based on the original MX6 it’s the only monotube reservoir shock on the market with six way external adjustability. Simply turn the one piece billet adjuster to your desired setting and go. Who says you can’t perfectly dial in your ride? This 2” monotube shock has anodized aluminum bodies and is nitrogen charged to 300 PSI. We’ve improved upon the MX6 design by adding a 10” anodized aluminum reservoir. It also features high quality parts like, gun drilled 14mm hardened chrome shaft, 4000 PSI 6” braided stainless steel hose, precision 46mm single piece banded monotube piston and one piece anodized billet cap.

Universal 8" of travel,
Extended=29", Collapsed=17.57"

Part # MX6067R

Price : $225.95 +S&H

Universal 10" of travel,
Extended=30.5", Collapsed=19.07"

Part # MX6068R

Price : $225.95 +S&H

Universal 12" of travel,
Extended=32", Collapsed=20.58"

Part # MX6069R

Price : $225.95 +S&H

*Note, if you need an exact fit application, please email or call us for sizing and price.

KC Jeep Wrangler Hood Mount utility light bar

KC 97 - 05 JEEP WRANGLER LIGHT BRACKETS

WARN 9.0Rc Rock Crawling Winch

WARN 9.5ti Thermometric Winch

WARN 9.5si M.O.S.F.E.T. Self-Recovery Winch

(Metal-Oxide-Semiconductor Field-Effect-Transistor). This winch packs 9500 lbs. of portable pulling capacity into a massive 12.5 lb. aluminum die-cast body. Operating temperatures from -40 degrees F to +180 degrees F wont phase it! Voltage drop to the winch is minimal for more efficient operation and low heat gain.

Part # 67600

Price $1,399.95 + S&H

TABOR 9K Self-recovery Winch by WARN

Best value on the market. Comes with automatic brake, 100 ft. of wire rope, low-profile freespooling actuator and a 3 stage planetary geartrain. The Tabor 9K winch includes a hand-held remote control with 12' lead, wire rope with hook, hook strap and roller fairlead. 9,000 lbs. pulling capacity. 1-year limited warranty.

Part # 900560

Price $574.95 + S&H

SMITTYBILT XRC-8 WINCH

encompasses all the best features you would want in a winch. Every XRC-8 (8,000 LB.) winch features a 4.1HP Permanent Magnetic Motor and a Planetary Gear System with 265:1 gear ratio that will deliver you power and reliability without hitting you pocket book. If you’re looking for a system that will muscle you out of any situation you can count on the XRC-8 to be there when you need it most.

Part # S/B97280

Price $299 +S&H